Whole husk · Specification sheet

Psyllium husk 95% specification

Our 95% psyllium husk is whole husk of Plantago ovata, milled in Siddhpur, Gujarat, at not less than 95% purity with a swell volume of not less than 40 ml/g. Light extraneous matter is limited to 5.0%, moisture to 12%, and total ash to 4%. Every lot ships with a certificate of analysis that reports these figures for that lot.

Reviewed 17 November 2026 · Same values as the PDF specification sheet we send buyers · Botanical source: Plantago ovata Forssk.

Purity
95%
Swell volume (min)
40 ml/g
Light extraneous matter
≤ 5.0%
Moisture
≤ 12%
Total ash
≤ 4.0%
Total consumable fibre
About 78%

What is psyllium husk 95% used for?

95% husk is the grade most food and supplement buyers start with: bakery, cereals, gluten-free baking, and fibre supplements.

See the psyllium husk product page for packing, samples, and lot documents.

Full specification

Test methods are listed against each limit; every lot certificate of analysis reports the measured result.

Physical and chemical
Parameter Limit Test method
Appearance Pale buff white coloured husk Visual
Odour Faint characteristic odour Organoleptic
Taste Bland mucilaginous Organoleptic
Texture Husk Visual
Identification (USP microscopy) A: Mounted in cresol-cell, viewed microscopically, composed of polygonal prismatic cells having 4 to 6 straight or slightly wavy walls. B: Mounted in alcohol and irrigated with water, viewed microscopically, the mucilage in the outer part of the epidermal cells swells rapidly and goes into solution. USP 42 (microscopy)
Purity Not less than 95% USP 42
Light extraneous matter (LEM) Not more than 5.0% USP 42
Heavy extraneous matter (HEM) Not more than 1.0% USP 42
Swell volume Not less than 40 ml/g USP 42
Total ash Not more than 4.0% USP <561>
Acid-insoluble ash Not more than 1.0% USP <561>
Moisture Not more than 12% USP <731>
pH 4 to 7 USP <791>
Total consumable fibre About 78% AOAC 985.29
Foreign smell / taste None Organoleptic
Foreign bodies (stones, glass & metals) None Visual inspection
Microbiology
Parameter Limit Test method
Total plate count (TAMC) ≤ 1.0 × 10⁵ cfu/g ISO 4833
Yeast and mould (TYMC) ≤ 1.0 × 10³ cfu/g ISO 21527
Salmonella spp. Absent in 25 g ISO 6579
E. coli Absent / g ISO 16649
Coliforms Absent / g ISO 4832
Heavy metals
Parameter Limit Test method
Lead (Pb) ≤ 2.0 mg/kg ICP-MS
Cadmium (Cd) ≤ 1.0 mg/kg ICP-MS
Arsenic (As) ≤ 1.0 mg/kg ICP-MS
Mercury (Hg) ≤ 0.1 mg/kg ICP-MS
Low-lead grade Available on request; lead limit agreed in writing before supply ICP-MS
Pesticides and residues
Parameter Limit Test method
Pesticide residues (each) ≤ 0.10 mg/kg GC-MS / LC-MS/MS
Ethylene oxide Absent GC-MS / LC-MS/MS
Allergens
AllergenStatusTest method
Gluten (wheat, barley, rye, oats)Absent / not detectedELISA / rapid allergen test
Milk & milk products (incl. lactose)AbsentELISA
Soybeans & soy productsAbsentELISA
PeanutsAbsentELISA
Tree nutsAbsentELISA
Sesame seedsAbsentELISA
MustardAbsentELISA
CeleryAbsentELISA
LupinAbsentELISA
Fish & fish productsAbsentELISA
CrustaceansAbsentELISA
MolluscsAbsentELISA
Egg & egg productsAbsentELISA
Sulphur dioxide≤ 10 mg/kgELISA
Packing, storage, and shelf life
Packing25 kg multi-wall paper or PP woven bags with an inner PE liner, or 450 kg and 950 kg big bags; custom sizes on request
Shelf life2 years from manufacture, unopened, stored cool and dry
Container load (loose stacked)20 ft: 9–14 MT · 40 ft HC: 20–26 MT, depending on grade
Optional treatmentSteam treatment (steam sterilisation) to lower the microbial count, priced per kg on request

Specification limits are shown above. Each lot is confirmed by its own certificate of analysis, which your QA team can review before the purchase order. If your product needs a lower microbial count than this sheet, ask for steam treatment: it is added to the per-kg price.

Questions buyers ask about this grade

What is the swell volume of 95% psyllium husk?

RM Psyllium specifies 95% psyllium husk at a swell volume of not less than 40 ml/g, measured by the USP method. Swell volume shows how much water the husk holds as it gels, so it is the quickest single check on fibre quality between grades. The measured figure for each lot is printed on its certificate of analysis.

How much extraneous matter is allowed in 95% psyllium husk?

Our 95% psyllium husk allows light extraneous matter (LEM) of not more than 5.0% and heavy extraneous matter (HEM) of not more than 1.0%. LEM is the light seed-coat and plant material left after milling, so purity and LEM move together: a 95% grade leaves room for up to 5% LEM. If your product needs tighter limits, state them on your purchase specification.

What heavy metal limits apply to 95% psyllium husk?

Our 95% psyllium husk is specified at lead 2.0 mg/kg, cadmium 1.0 mg/kg, arsenic 1.0 mg/kg, and mercury 0.1 mg/kg maximum, tested by ICP-MS. These figures sit within the EU maximum levels for food supplements under Regulation (EU) 2023/915 (lead 3.0, cadmium 1.0, mercury 0.10 mg/kg). For California, check lead per daily serving against the Proposition 65 limit of 0.5 µg per day; low-lead husk is available on request.

Specification sheet and sample COA

Get the signed sheet for Psyllium Husk 95%

Tell us the grade, mesh, monthly volume, and destination. We reply within 48 hours with the signed PDF specification, a sample certificate of analysis, and today's price list.

Request a quote We respond within 48 hours