Raw material storage
Psyllium seed from the farms we buy from directly is held here in bags, stacked on pallets off the floor, until it goes to cleaning. The open shutter ahead leads straight into the processing hall.
Virtual factory tour
Walk through the RM Psyllium mill in Siddhpur in the order the material moves: raw seed storage, two levels of cleaning, the grinding lines and the winnowing room. Nine stops, photographed inside our own plant. Raw material storage is open to everyone; verify your company email for a 48-hour pass to the rest.
9 stops in 360°
Walk the mill before you order the sample.
Drag to look around. Works on phone and desktop.
The tour could not load. Refresh the page to try again.
Raw material storage
Mill floor · 9 stops
Walk inside the plant
Raw material storage is open to everyone. To walk the cleaning, grinding and winnowing lines, verify your company email. Your pass lasts 48 hours.
We use your email to send the code and to follow up on your enquiry. Nothing else.
Please use your company email
Personal addresses like gmail.com or outlook.com can't get a code automatically. Use your company email, or ask us for access and we'll approve it.
Enter the code from your email
We sent a code to . It expires in 10 minutes.
Preparing the plant tour
Loading the next part of the mill so the walk runs smoothly.
0%
Request sent
Thanks. We'll approve your access, usually within a working day, and you can then get your code here with the same email.
From the crop and seed intake to cleaning, dehusking, packing and the lab checks every lot goes through.
One long building: seed comes in at the south end and moves north. Tap a number to see that stop.
Psyllium seed from the farms we buy from directly is held here in bags, stacked on pallets off the floor, until it goes to cleaning. The open shutter ahead leads straight into the processing hall.
The hall floor is the junction of the plant. Stairs climb to the cleaning section, and the yellow walkway runs north between mill lines 2 and 3 into grinding. Around you are a specific gravity separator (GS-1), the electrical control panel for the hall and a storage tank (ST-3) overhead.
From the edge of the cleaning platform you look north across the whole grinding section. Cleaning and grinding share one open hall with no wall between them, and the destoner (DS-1) stands right behind you.
Seed is cleaned on two machine levels before it reaches the mills. On level 1, a destoner (DS-1) separates stones and heavy particles from the seed, and a cyclone pulls dust out of the cleaning air.
The top deck sits just under the roof. Here you can see a classifier (CL-2), an aspirator (AS-1), the green-framed rotary dehusker and scourer, and a cyclone handling air and dust separation.
Grinding runs as mill lines on ring platforms either side of a central walkway. Bucket elevators lift material between stages and grinding machines sit on the platforms above, like elevator EL-4 and grinding machine GM-7 at this stop. Straight ahead, the walkway runs on toward the husk collection aisle.
This aisle runs along the hall wall. Each mill has its own stainless steel cyclone, and the hoppers below fill output bags directly on the floor.
The upper platform at the north end of the lines carries the elevator heads, a storage tank that feeds the mill lines below and a classifier. Look back south for the full length of the grinding walkway; the door ahead leads to winnowing.
Winnowing has its own room after grinding. Winnowing machines line the far side, and a second specific gravity separator works in the same room.
Yes. RM Psyllium processes psyllium at its own mill in Siddhpur, Gujarat, India. Seed storage, two-level seed cleaning, grinding, husk collection and winnowing all run in one building, and this 360° tour walks through each of them. We are a processor, not a trading desk, so the husk we quote is cleaned, milled and packed under our own roof.
The RM Psyllium mill is on Patan Road, Khali Char Rasta, Nedra, Siddhpur, Gujarat 384151, India, in the North Gujarat psyllium belt where Plantago ovata is grown as a winter crop. We buy seed directly from farms and clean, mill and pack it at this 55,000 sq ft mill, so every lot comes from the plant you can walk through in this tour.
Psyllium seed goes through six stages at the RM Psyllium mill in Siddhpur: raw material storage; seed cleaning on two machine levels with a destoner, classifier, aspirator, rotary dehusker and scourer; grinding on mill lines that separate the husk from the seed; husk collection through a cyclone on each mill; winnowing with air and a specific gravity separator; and packing in food-grade bags. The 360° tour shows the first five stages and the factory video shows packing.
Psyllium husk from India is safe to use when each lot is tested and the results meet your specification. Most of the world’s psyllium is grown in India, so the real question is which lot, not which country. RM Psyllium treats lead, arsenic, cadmium and mercury as the core heavy-metal checks, and you review the COA, including result, unit, method, limit, report date and lot identity, before you approve a shipment.
The RM Psyllium mill produces psyllium husk at 85%, 95%, 98% and 99% purity, husk powder from 40 to 120 mesh, and psyllium seed. For supplement and pharmaceutical use, we review the COA for your lot against the pharmacopoeia your product follows, such as USP or EP, before dispatch, so the claims on your label match the material that was tested.
The RM Psyllium mill in Siddhpur, Gujarat covers 55,000 sq ft and has an annual processing capacity of 1,500 MT across psyllium husk, husk powder and seed. Orders are planned around each buyer’s grade, mesh, packing and shipping schedule, so a first trial order and a regular container program run on the same lines you see in the tour.
Yes. RM Psyllium sends samples of any listed grade, sized to your trial, by DHL, and they usually arrive in about five days. You pay the courier fee, and the sample comes with its COA so your lab can test against it. Most buyers test the sample, review the documents and then plan the first order.
RM Psyllium packs husk and powder in 25 kg bags, or in 450 kg and 950 kg bulk bags, and ships by sea container FOB or CIF from Mundra, Kandla or Nhava Sheva. Your freight forwarder or customs broker handles import clearance at destination. Smaller commercial lots for urgent or trial production runs can also go by air.
Yes, by appointment. RM Psyllium arranges mill visits in Siddhpur, Gujarat for buyers with an active sourcing program, once the date is confirmed with our export team. Most buyers start with this 360° tour, the factory video and a sample, and visit when an order program is taking shape. Write to export@rmpsyllium.com to ask about a visit.
Tell us the grade, mesh, purity, packing and destination market you need. We aim to reply within 48 hours and can send a sample for your lab to test.