Psyllium Husk Powder
من غوجارات، الهند.

40–60 mesh ASTM corresponds to particle sizes of 250–425 μm. At this size, particles are visible in most finished products. Suitable for applications where coarse texture is acceptable — gluten-free artisan bread, high-fibre cereal, or animal feed blends.

Yes. At 1–3% of total flour weight, psyllium powder binds water and improves crumb structure in gluten-free doughs. At 85% / 40–60 mesh, the coarser particle size may be slightly visible in the crumb but is acceptable in most artisan-style products.

85% grade is food-grade. It does not meet NF, USP, or EP pharmacopoeia thresholds for supplement or pharmaceutical labeling.

No minimum order. Available in 10 kg, 25 kg, and 50 kg bags — order as little as a single bag. FOB Mundra. COA per shipment.

Approximately 100 cP at 1% aqueous solution. Suitable for functional food and supplement applications where some viscosity build is needed without the gel-forming behaviour of finer grades.

Yes. At 80 mesh (177 μm), flow characteristics are suitable for dosator and tamping-pin filling equipment. Moisture should be ≤10% at time of filling. We supply with sealed HDPE liner on request for moisture-sensitive applications.

Yes. 95% grade meets the NF monograph threshold. COA annotated to NF parameters available on request. For USP or EP annotated COA, use 98% or 99% grade.

Minimum 42 ml/g per our specification.

Yes. COA annotated to USP or EP parameters available on request. Parameters include swell volume (≥48 ml/g), moisture (≤12%), total ash (≤3.5%), acid-insoluble ash, heavy metals, and full microbiology.

149 μm or smaller. At this particle size, powder disperses uniformly in drink mixes and does not produce visible texture in most food applications. Flow is good for capsule filling equipment.

Approximately 250 cP at 1% aqueous solution. Higher than 80 mesh grade due to finer particle size and greater surface exposure. Suitable for drink mixes, pharma suspensions, and functional food matrices.

Yes. 100–500 g samples with COA annotated to your pharmacopoeia. Share your grade, mesh, target standard, and shipping address. Sample lead time 3–5 business days.

200 mesh ASTM corresponds to 75 μm or smaller. This is the finest standard grade we supply. Used where uniform, ultra-fine particle distribution is critical — cosmetic formulations, premium supplement powders, and pharmaceutical production.

Approximately 400 cP at 1% aqueous solution — the highest in our powder range. Reflects maximum mucilage exposure at the finest particle size. Important for applications where thickening or gel formation is the functional requirement.

Yes. We supply COA annotated to USP, EP, or IP as required. Swell volume ≥55 ml/g, moisture ≤10%, total ash ≤3.0%. Specify your pharmacopoeia edition and destination market when requesting.

Yes. At 200 mesh (75 μm), the powder disperses smoothly in aqueous formulations used in cosmetics and personal care — face masks, thickeners, natural gels. Supplied with heavy metal testing and full ingredient documentation on request.